This product is hot-rolled I-beam, made of high-quality carbon structural steel by hot rolling. Its section is I-shaped, consisting of a web and top/bottom flanges with sloped inner surfaces and unequal thickness. It features simple structure, good bending resistance, and convenient processing & installation. With high dimensional accuracy, smooth surface, and good weldability, it is widely used in building beams, workshop supports, machinery bases, vehicle frames, and medium-small steel structures for mainly vertical loads and moderate spans.
Thông số kỹ thuật sản phẩm
| Item | Thông số kỹ thuật |
| I-Beam Model | 10# – 63# (Standard & Customizable) |
| Height (h) | 100mm – 630mm |
| Chiều rộng mặt bích (b) | 68mm – 180mm |
| Độ dày tấm lưới (d) | 4.5mm – 13.0mm |
| Flange Thickness (t) | 7.6mm – 24.0mm |
| Chiều dài | 6m – 12m (Fixed length) |
| Process | Hot rolling |
| Bề mặt | Smooth, no cracks, no slag |
| Tiêu chuẩn | GB/T 706-2016, ASTM A6/A6M, EN 10025, JIS G 3192 |
Thành phần hóa học
| Yếu tố | Content (≤%) |
| Cacbon (C) | 0.22% |
| Silic (Si) | 0.35% |
| Mangan (Mn) | 1.50% |
| Phốt pho (P) | 0.045% |
| Lưu huỳnh (S) | 0.045% |
| Sắt (Fe) | Cân bằng |
Tính chất cơ học
| Tài sản | Giá trị điển hình |
| Yield Strength | ≥235MPa |
| Độ bền kéo | 375–500MPa |
| Độ giãn dài | ≥21% |
| Bending Test | 180° no crack |
| Impact Toughness | ≥34J (20℃) |
Brief Difference between I-beam&H-beam
- I-beam has narrow flanges with sloped inner surfaces and unequal thickness, weak in torsion, suitable for unidirectional bending.
- H-beam has wide, uniform-thickness flanges with right angles, higher moment of inertia and better torsion resistance, ideal for large-span & heavy-load structures.
